CALL US: 704.821.1115 | EMAIL US ❯

Filter Elements

Filter_Elements Fiberglass wound on 316, 304 Stainless or mild steel cores to effectively filter solids from thermal fluid or hot oil. These filter elements easily withstand continuous temperatures of 750°F (399°C).

Most common micron particle retention sizes range from 100 micron down to 50, 25, 10 and 5 micron. Larger and finer micron winds are available from 350 micron to as small as 0.5 micron.

Dirt holding capacity per 10 inch length of element ranges from 3.75 lbs. (60 oz.) at 5 micron to 7.75 lbs. (125 oz.) at 50 micron with better than 95% efficiency.

Filter elements are available in cotton and polyester materials for other oils, lubricants and process fluids filtered at lower temperatures. FDA polypropylene for use in food processing facilities is also available.

Filter elements are Made in USA.